How to prevent rust and corrosion on fishing rods
Release time:
2023-06-25
Fishing rods will often get wet in the process of use, especially seawater salt is very high, and many stainless steel fittings will also cause rust due to the material or use of the problem. Require fishing rods after use, open the tail piece of the wire buckle, in clean water back and forth to flush clean sand, salt and other dirt, and then use a dry rag to wipe off the surface of the water, and finally placed in a cool and ventilated environment to dry can be collected.
Fishing rods will often get wet in the process of use, especially seawater salt is very high, and many stainless steel fittings will also cause rust due to the material or use of the problem. Require fishing rods after use, open the tail piece of the wire buckle, in clean water back and forth to flush clean sand, salt and other dirt, and then use a dry rag to wipe off the surface of the water, and finally placed in a cool and ventilated environment to dry can be collected.
If there are dirt that can not be brushed clean, please use soap and water, do not use petrol, thinner and other organic solvents or hard brushes. Pay special attention to the fishing rod can not be placed in the boot of the car and other high-temperature airtight place for a long time. All the above work is to prevent the metal fittings from rusting and the surface paint of the rod body from discolouring, blistering and peeling off.
Keywords:
Previous
Next
Previous
Next
Related News
How to perform a weight picking test
2023-06-26
2023-06-26
2023-06-26
How to check the quality of a fishing rod
2023-06-26
Weihai Fuyuan Baichuan Fishing tackle Co., Ltd