Precautions to be taken when manoeuvring for fishing
Release time:
2023-06-26
When removing the sheath, pull it out to the top, hard twisting and prying will cause the tail section to break.
1、When removing the sheath, pull it out to the top, hard twisting and prying will cause the tail section to break.
2、When you start fishing, align the front and rear guide rings, otherwise it will cause the main line to wrap around the rod or the tail end to break.
Don't reel in the main line that is twisted into a knot to prevent the rod from breaking.
4、To try to use the rod according to the requirements of the use of the pendant, do not let the tail section too much force.
5, in the fishing process, if the bottom, absolutely not too hard to lift the rod hard digging, the consequences of most of the rod to break and end.
6, in the sand fishing should be careful to prevent sand into the rod joints and fish wheel, should use the rod frame or other objects to support cushion up.
7, fishing should prevent too much excitement on the big fish, and the big fish with the fierce force, here there is a broken rod and run fish regret.
8, fishing should be careful with high-voltage power supply equipment, in thunderstorms, should be put down in the hands of the rod to take measures to avoid lightning.
9, in the process of fishing in the bank need to change position, to contract the rod and then climb the mountain, across the water, through the forest, can prevent broken rod and other inconveniences.
10, in the beginning of the use of do not remember to throw stretch instead of stretching, otherwise it will cause "dead section".
11, in the bank and boat fishing, the rod must first look after the front and back to take care of the left and right, in order to prevent injuries and damage.
Keywords:
Related News
How to perform a weight picking test
2023-06-26
2023-06-26
2023-06-26
How to check the quality of a fishing rod
2023-06-26
Weihai Fuyuan Baichuan Fishing tackle Co., Ltd